Technical information

Visual Studio 2005 IDE screen may look like the following screen shot.
Fig. 30 - VS2005 IDE / New Project
Compile and build the Visual C# application.
Step 2: Preparing eBox-2300 to Connect to VS2005
To perform this portion of the exercise, CE 6.0 image configured and built during the previous
sections of this guide must be downloaded and running on eBox-2300, and
eBox2300_WinCE600_SDK must be installed.
Corecon components are used to connect eBox-2300 to Visual Studio 2005 development
workstation.
The following 5 files need to be copied to \Windows\ folder on eBox-2300.
• Clientshutdown.exe
• ConmanClient2.exe
• CMaccept.exe
• eDbgTL.dll
• TcpConnectionA.dll
These files are stored at the following directory on the Visual Studio 2005 development
workstation.
“..\Program Files\Common Files\Microsoft Shared\CoreCon\1.0\Target\wce400\..”
Corecon components supporting different CPU architectures are provided. There are folders,
with names corresponding to the CPU, containing Corecon components for each CPU family.
eBox-2300 is designed using an x86 CPU architecture. CoreCon components in the “..\x86” sub
folder are used.
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 33 of 53