Technical information

Note: In the environment where there are multiple eBox-2300s connected to the same
network segment, with multiple eBox-2300 sending bootme request, there may be
multiple device IDs listed in the Active Devices windows. To identify the eBox-
2300 you are working with, make sure it’s the only one booting and sending a bootme
request.
On the Target Device Connectivity Options screen, click on Apply and then Close.
Downloading Image to eBox-2300
You are now ready to download the Windows CE image built during the earlier steps to the
eBox-2300. From VS2005 IDE select Target | Attach Device. The following “Download
Runtime Image to …” screen will come up.
Fig. 22 - Download Runtime Image / waiting for bootme request
• Turn on power and boot up eBox-2300
• Select an option from the menu according to your setup and display preference
After eBox-2300 completes the boot-up process and send boot-me request, you will see activities
on the Download Runtime Image screen showing the image being download to the device.
Fig. 23 - Download Runtime Image / downloading
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 27 of 53