Technical information

Build Complete - Windows Embedded CE 6.0 OS Image Generated
When the build process is completed, the VS2005 IDE should look like the following:
Fig. 17 - VS2005 IDE – Build completed
When the build process is completed, the resulting files are generated in the following build
release directories.
For the Debug image:
C:\WINCE600\OSDesigns\eBox2300\eBox2300\RelDir\ICOP_Vortex86_60CS_x86_Debug
For the Release image:
C:\WINCE600\OSDesigns\eBox2300\eBox2300\RelDir\ICOP_Vortex86_60CS_x86_Release
Searching the above directories, with a successful build, there should be a NK.BIN file. This is
the Windows Embedded CE 6.0 OS image.
The next section will cover connecting the eBox-2300 to the development station to download
and execute the image built in this section for the eBox-2300.
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 23 of 53