Technical information

Configure OS Design Project Properties – Build Options
With different Build Options, the OS Design can be further customized to include additional
functions to the final image, provide additional debug resources, etc…
From VS2005 IDE, select Project | eBox2300 Properties… to bring up the OS Design Property
screen.
Fig. 14 - OS Design Property – Build Options
• Click to expand Configuration Properties tree on the left side of the screen.
• Click to high-light Build Options, a list of Build Options with check boxes will be
shown on the right side of the screen.
• Select Enable eboot space in memory (IMGEBOOT=1)
This option adds support for Ethernet debugging by bundling the Ethernet boot loader in
the image.
• Select Enable ship build (WINCESHIP=1)
This option will enable a retail build and suppress debug messages.
• Disable KITL – Make sure the Enable KITL (no IMGNOKITL=1) check box is NOT
selected.
Note: When deploying a release image onto eBox-2300’s local storage with KITL
enabled, the system may not boot or takes a long time to complete the boot
process. This is caused by the system looking for an unavailable KITL
connection, and it eventually times out and completes the boot.
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 20 of 53