Technical information

Serial Ports Com16550 (Driver available from PB’s component catalog)
Serial Ports
Serial Port Support (Support components from PB’s component
catalog)
USB Ports (USB 1.1 Host) OHCI (Driver available from PB’s component catalog)
CompactFlash*¹ ATAPI (Driver available from PB’s component catalog)
IDE ATAPI (Driver available from PB’s component catalog)
*¹ The CompactFlash (“CF”) slot on eBox-2300 is link to the IDE interface, and does NOT support hot-
swap. When a CF card is plugged into the slot prior to power on, the system will detect and
recognize the CF card as slave IDE storage. When booting to CE 6.0, the CF card will shows up as
“Hard Disk 2”
To learn more about each of the components on the catalog, refer to the help document.
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 18 of 53