Technical information

Part 4 – Customize and build the OS Design
At this point, with the help of the OS Design Wizard, the eBox2300 project is created using the
Internet Appliance design template along with ICOP_Vortex86_60CS BSP. The following
project folders have been created for the eBox2300 project, under the main CE 6.0 Platform
Builder’s OS Designs directory (..\WINCE600\OSDesigns\).
• C:\WINCE600\OSDesigns\eBox2300\
Folder for the eBox2300 Solution
VS2005 supports different project types. A solution provides a centralized work
environment to keep different project types supporting the same solution in one location.
For example, the eBox2300 solution may include an “eBox2300 OS Design”, “Visual
Basic managed code application”, “Visual C# managed code application” and “Visual
C++ native code application”.
• C:\WINCE600\OSDesigns\eBox2300\eBox2300\
This is the folder for the eBox2300 CE 6.0 Platform Builder project, an OS Design.
Your VS2005 IDE should look similar to the following screen:
Fig. 11 - VS2005 IDE after OS Design Wizard
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 15 of 53