R623 User Manual Thank you for purchasing the R623 mobile phone
Introduction Welcome to choose the R623 mobile phone. This user manual states the outstanding performance of the R623 mobile phone in detail. In addition to the basic call features, the R623 mobile phone and the system network also provide you with a variety of useful features and services to facilitate your work and leisure activities. The Company reserves the right to make any amendment on the technical specifications without any advance notice.
CONTENT INTRODUCTION................................................................II SECURITY AND PERFORMANCE...................................1 1 START USING.................................................................3 1.1 B ATTERY .............................................................
12 ORGANIZER...............................................................11 13 MULTIMEDIA..............................................................12 14 SETTINGS...................................................................13 1.11 U SER PROFILES .................................................
Security and performance ◆In thunder raining days, please do not use the mobile phone when charge it or outdoor, so as to avoid being struck by thunder or other injuries.
◆Please do not use the phone to make bold to camera, video and recording that may infract the rights of the copyright owners. The company will not be responsible for any losses caused by not recording, deleting, destructing or damage of the photos, video and recordings caused by its accessories or software on the use of the functions including camera, video and audio.
1 Start Using 1.1 Battery Battery is attached with the phone. Please recharge it for use after completely using up the battery for the first three times, which makes this battery easier to achieve the best using state. In actual use, the standby time and talk time of the phone varies with the network status, working environment and different using manners.
use of the SIM card cannot be prevented. If the PIN code input is error for three consecutive times, your SIM card will be locked by the network. There will enquire the PUK code which provided by your network operator. If the PUK code input is wrong for 10 times, the SIM card will be permanently barred. Note: Your network operator will set a standard PIN code and you should change it to private password. 1.
Indicating that the Bluetooth has been activated Indicateing that WLAN has been connected Indicating that alarm has been set T-flash card is inserted and recognized 1.5.1 Keys Functions of the keys are described as following: SN 1 2 3 4 Keys Send key (Snd) End key Left soft key (LSK) Right soft key (RSK) Function description Making a call; in standby screen press the key to enter Call history. Hang up a call; go back to the standby screen; long press to power on/off the phone.
5 OK key 6 Navigation key 7 Keypad 8 Receiver 9 Volume key 10 USB jack 11 Speaker 12 Camera 13 Cover button OK; short press to enter the dedicated application; long press the key to lock the keypad. Use the navigation key to moving to the upward/ downward/left/right. Input; in the main menu screen short press the number key to enter corresponding menu; in standby screen, long press 2-9 key to speed dial (need set); long press # key to active Silent mode.
improve the signal strength. In the standby screen, input the call numbers or select contact in phonebook, and then press the Snd key to make the call. If the speed dial function is activated, in standby screen, long press the number keys 2-9 to dial the number that has been set up automatically. If speed dial has not been set for the number key you long pressed, the mobile phone will hint you “No speed dial number”. 1.
card, you are also able to make an emergency call. Note: The emergency call numbers in different countries or regions are different. Please refer to the local numbers for specific emergency service numbers. 3 Menu operation In the standby screen, press LSK to enter the main menu, you can press navigation keys or corresponding number key to select the function you want to enter.
1.10.1 SIM1/SIM2 call settings Caller ID: you can set whether to allow your phone number being displayed or not. This function needs to be supported by the network service provider. Call waiting: If the function is activated, when a new call incoming in calling process, your phone will display the new call screen. If the function is deactivated, new incoming calls cannot be reached. Call divert: this function is used to transfer the call to your designated number.
operator of connect, add, define access point, WLAN status, disable WLAN, power save mode and refresh. Highlight the connected AP, active Options you can do the options of disconnect, add, edit, delete, change priority, WLAN status, disable WLAN, power save mode and refresh. Conn. Management: you can view the current connection states. Data account: with valid SIM card with GPRS function inserted, there will show the available accounts of GSM data and GPRS. Data account can be edited or delete.
GPRS connection, and turned on the MMS. Please consult with your network service provider. 10 Services Internet service: enter Internet service; you can normally use the WAP internet service under the premise of correctly setting the network. This function is provided by the network operator, Please contact with your network operator or service provider. STK (SIM Tool Kit): the name and content of the menu are based entirely on the services provided by the network operator.
operation which you need, then start calculation. Currency converter: in this function, if you input the rate and the amount of money in local, you can get the result of the equivalence money of foreign. Health: enter into health; you can select BMI to check the detail information. Stopwatch: in stopwatch screen, you can select the typical stopwatch or nWay stopwatch and view records that you have saved. Ebook reader: this function can be used for reading the files with .txt format.
radio automatically and record current program when time out. 14 Settings Enter Settings, you can modify parameters of the time and date, personalized settings and phone settings. You also can add new font from your system that in .ttf format. 1.11 User profiles User Profiles contains predefined settings for ring tone and volume for each SIM. You can change the existing profiles according to your own preferences. In the standby screen, long pressing the # key will quickly activate Silent mode.
you can press any key except end key, and then operate according to relevant screen prompts. Certificate manager: store the certificates. Private security: enter Private Security, you should input the correct password (default password is 0000). Then you can select phonebook, messages, call log or file manager to set up the privacy protection. Calls & SMS firewall: enter calls & SMS firewall, you can press left/right navigation key to switch between blacklist and whitelist.
17 Common Questions Unable to make some calls n Call barring has been set and barred utilization of the mobile phone. Please check and cancel call barring. Other person is answering my call n The mobile phone has been set into divert your calls to another phone number. Please check and cancel call divert.
18 Maintenance Guideline Welcome to use R623. If there is a problem when you using the phone, please contact with the vender or consult the local maintenance center. If your mobile phone is in need of repair, you can take your phone to local maintenance center, if there is no local maintenance center, please pass your phone and the purchasing invoice to the vendor.
