I121C FULL USER MANUAL VERYKOOL
CONTENT I
1. Warnings Not following these simple guidelines may be dangerous or illegal. Read the complete user guide for further inform ation. TURN ON SAFELY Do not turn on the phone when wireless phone is prohib ited or when it may cause interference or danger. ROAD SAFETY Obey all road safety laws. Always use both of your hands to operate the vehicle while driving. INTERFERENCE All wireless phones may be sensitive to interference, which may affect performance.
TURN OFF IN HOSPITALS Follow all restrictions. Turn off the phone near medical equipment. TURN OFF ON AIRCRAFTS Follow all restrictions. Wireless devices can cause interference on aircrafts. TURN OFF WHEN REFUELING Do not use the phone at/near refueling stations. Do not use near fuel or chemicals. USE SENSIBLY Only qualified personnel may install or repair this product.
Use only appropriate enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACKUP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any external device, read its user guide for detailed safety instructions. Do not connect with incompatible products.
2. Getting Started 2.
The Symbols above indicate: 1. Left Soft Key 2.
3. Dial Key 4. End Key/Power Key 5. Navigation Keys 6. OK Key 7. Number Keys 8. Receiver 9.
10. Speaker 11. Torch 12. USB Port 2.
Left Soft key/ Right Soft key 1. Execute functions that the leftdown/right-down corner indicator shows. 2. In standby mode, press left soft key to access Menu, press right soft key to access Names. 3. When keypad is locked, press left soft key and right soft key to unlock. Navigation Keys 1. In other modes, it is used as the navigation/direction key except for some special functions. 2. In the standby mode, press navigation keys to enter shortcuts functions. OK Key 1.
key to do option. 3. In other mode, press this key for confirmation. End Key/ Power Key 1. Mainly used as power on/off. 2. Press to return to standby screen in any interface. 3. End calls or reject incoming calls. Dial Key 1. Press this key to dial or receive an incoming call. 2. In standby mode, press this key to access Dialed. Number Keys Torch Light Key * Key 1. Use these keys to input numbers or letters. 1. In standby mode, long press OK key to turn on/off torch light. 1.
* key to lock keypad. # Key 1. In text editing interface, press # key to switch the text input method. 2. Press and hold # key to transfer the profile of General/ Silent/Meeting in standby mode. 2.3 Battery Installation Caution: Install according to the illustration above to avoid breaking the battery connectors.
2.4 SIM Card/T-Flash Card Installation ** For Single SIM handset, you will only see one SIM on the image below. ** To install a T-flash card, please follow the steps: Step a: Insert the T-flash card into the slot. Step b: Put down the cover and slide it toward the left side. Caution: Do not bend or scratch your SIM card and TFlash card. Avoid exposing your SIM card and T-Flash card to static electricity, water, or dirt.
Flash card into the slot. Press and pull the cover up to lock it. 2.5 Charging the Battery Insert the charger into USB interface of the phone. Connect the charger to a standard wall outlet and the bat tery power icon in the up-right corner of the screen will start scrolling. When the battery bar stops scrolling, the battery charge is complete. Press the two sides of the charger plug and disconnect the charger from the phone.
2.6 Security Settings ― PIN code PIN code (Personal Identity Number) prevents unauthor ized use of your phone. The PIN code is provided by your network operator with the SIM card. If you enter the wrong code three times in a row, the PIN code will be blocked. To unblock the PIN code, you need to enter your PUK. Your PUK is provided by your network operator. ― Power on Password Activate/Modify/Deactivate power on password (the length of the password is 4-8 digital numbers).
2.7 T-flash Card Insert the T-Flash card into phone. This will expand the Flash memory of the phone. 2.8 USB Cable You can transfer and store files, such as MP3, MP4 and pictures from PC, through USB cable, to the mass storage in phone or identified SD card that is inserted. 3. Basic Functions 3.1 Making a Call In standby mode, press numerical keys to input phone number to dial. If you’re making a long distance call, add the area code preceding the telephone number.
also press OK key to access option. During a call, press the navigation keys to adjust the volume. 3.2 Emergency Service You can dial an emergency call without the SIM card. Contact your service provider to get the emergency call number. 3.3 Answering a Call When you receive a call, the phone will ring or vibrate and will display an incoming call indicator. Press the Dial key, left soft key, OK key to answer.
You can press end key to reject or end a call. 4. Guide to Menu Operations 4.1 Call History In the call history menu, you can check dialed calls, re ceived calls, missed calls, etc. ― ― ― ― ― ― Dialed: Display the latest dialed calls list. Received: Display the latest received calls list. Missed: Display the latest missed calls list. Rejected: Display the latest rejected calls list. Delete all: Delete all records. Call time: Display the call time record of SIM1 and SIM2. 4.
ation and numbers while also search for previously stored contacts. Press left soft key to access Option: ― ― ― ― ― ― Add new: To add a new record into phone book Search: To search record names in the phone book Send SMS: Send SMS to the number. Call: Select SIM1/2 to call the number Delete: To delete the record Mark: Mark the phone number, you can select to mark one or mark all. ― Copy: You can copy the record to SIM cards and phone.
The alarm clock feature sounds an alert or makes a vibration alert at a time you specify. There are 3 alarm clocks can be edit and set. 4.4 Multimedia 4.4.1 Camera Camera: Press left soft key or OK key to enter. The photo can be previewed in the screen; press OK key to shoot and right soft key to back, left soft key to access Option: Photos, Settings, Storage, Shoot mode, Size, Scene mode, Light, Contrast, White balance, Delay, and Effect settings.
4.4.2 Audio Player This function menu is used to store and play the audio files. Press the left soft key or OK key to enter and then use the left/right navigation keys and OK key to operate audio player. Press * key and # key to adjust volume. Press left soft key you can access Option. 4.4.3 Video Player Preview the videos. Press * key and # key to adjust volume. Press navigation keys to select and OK key confirm to enter.
“Off” to turn off the radio. 4.4.5 Sound Recorder You can take a recorder in this function. From the left to the right: Play/Pause, Stop, Record/Recording Pause, Re cord File list. Use * key and # key to adjust the volume. Press OK button to record. After record, press left soft key to access Option: Audition, Record again, Delete, Send, and Record file list. After entering the record file list, select one file, press left soft key to access Option. 4.5 Messages 4.5.
sage. ― ― Writing language: Select writing language. Insert template: Select a template to insert to the message. ― ― ― Contact info: Insert a number to the message. Add phiz: Select a phiz to insert to the message. Save: Save the edited message to draftbox. 4.5.2 Inbox After entering the Inbox, press up/down navigation key to select messages. Press OK key to check the details of message, or press left soft key to access Option. 4.5.
4.5.4 Draftbox You can save unsent and edit incomplete messages in draftbox. Press left soft key to access to Option. 4.5.5 Sentbox Check the message in sentbox. Select one message to open, or press left soft key to access Option. 4.5.6 More 4.5.6.1 Templates Press up/down navigation key to select a template. You can edit, send, or turn back to upper menu. 4.5.6.2 Voice Mail This function needs a network supply. Please contact with your service provider for more information.
4.5.6.3 Broadcast ― ― ― ― Read: Read broadcast Startup: Select Turnon/Deactivate Channel: Check channel list Language: all language, English, etc 4.5.6.4 SMS Settings To set parameters related to SMS. 4.5.6.5 Memory Status Check the message memory of SIM cards and phone. 4.5.6.6 SMS Count Check amount number of sent and received SMS. 4.6 Organizer 4.6.1 Calendar You can use this feature to view the year, date easily. Use navigation keys to navigate other date.
4.6.2 Bluetooth This mobile phone support Bluetooth wireless connection. You can establish wireless connection between mobile phone and device to realize voice communication, data exchange and synchronization. Press left soft key or OK key to enter: Open/Close bluetooth, Bluetooth visibility, Paired device, My bluetooth name, and Bluetooth file location. 4.6.3 Calculator This feature can use your phone as a calculator for simple calculations. Press number keys to enter the numbers.
4.7.1 Picture Browser Enter picture browser, you can choose photos to view or return. Press left soft key to access to Option: Change folder, Send, Slide play, Delete, Rename, Mark, Detail and Slide setting. 4.7.2 E-Book Reader Read E-Book stored in memory card. Select one txt file to open, and then press left soft key to access Option: Add bookmark, See bookmark, Jump to start, Jump to end, Jump to percent, and Turn on/off backlight.
whenever you want. 4.8 File Manager Enter this menu; you can check the files store on memory card. Select one file and press left soft key, you can do op tion. 4.9 Settings 4.9.1 Call ― Dual SIM Setup Set the parameters related to dual SIM. ― Network Select This function can let you select the network manually or automatically. Select SIM1/SIM2 and then access: Auto Select: Press the left soft key and confirm, the mobile phone will search various networks.
able network. Manual Select: Press the left soft key and confirm, the mobile phone will search various networks. You can select the suitable network from the listed networks. ― Call Divert When the call divert is activated, incoming calls will be diverted to voice mail or other phone numbers according to the call divert settings. ― Call Barring When the call barring is activated, some of the calls will be barred according to the call barring setting condition.
To set whether hide your ID. ― Line Switching To select Line 1 or Line 2. ― Flight Mode You can do the settings: Active or Select When Power On. ― More 50 Secs Warning Set: Activate/ Deactivate. Answer/Reject Mode Set: SMS reply after reject/ anykey answer Auto Redial Set: Activate/ Deactivate. Call Limiter To limit the call duration. When set the function activated, input time (1-9999s) to set the limiter. 4.9.
― Time & Date You can set time, set date, time display type, and date display type. ― Language You can choose several languages under this function. ― Set Shortcut You can select different functions for shortcuts. ― Schedule Power On/Off You can set Auto Power On and Auto Power Off of: Time, Mode (Once/Every Day/ Every Week). ― Power Management To check battery capacity here ― Restore Factory Input default password 1234 to restore factory settings.
4.9.3 Display ― Wallpaper You can set wallpaper under this function. ― Idle Display You can choose the items list under this function. This can be multiple selected. ― Contrast Press left/right navigation keys to adjust contrast, and then press left soft key or OK key to confirm. ― Backlight Set Backlightness and Time here. ― Keypad Light Set keypad light or deactivate. ― Animation Effect You can set animation effect of power on animation, power off animation.
4.9.4 Security ― PIN PIN number setting can avoid unauthorized usage of SIM card. If PIN number has been wrongly inputted for 3 times, the SIM card will be locked. PUK number is needed to unlock the SIM card. Please contact the network provider if you don’t know the PUK num ber. The default setting PIN number is provided by the network operator, please set your own PIN number as soon as you receive the phone. ― PIN2 You can modify the PIN2 number here.
― Auto Key You can set the time to lock the keypad automatically. ― Red Key Locks Keypad After setting for activate, by pressing red key in standby mode to turn off the screen and lock keypad. ― Power on Pwd Set the password for power on. 4.9.5 User Profiles This phone provides several profiles, by pressing left soft key or OK key, you can enter option to set: Active, Set tings, and Rename. 5. Entry Mode You can use several methods for entering text and numbers.
few Text Entry Mode for new adding, editing contact records, finding contacts, editing SMS and writing memos. Select Text Entry Mode: 5.1 Letter entry mode Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and the text awaits the next entry. For example, press the "2" key continuously, it will appear “a”, “b”, “c”, “2”one by one. 5.
Battery care • Your device is powered by a rechargeable battery. When the power is weak, please charge the battery. In order to extend the lifespan of the battery, use all the battery's power before recharging. • Unplug the charger from the electrical plug and the device when not in use. Do not leave the battery connected to a charger more than a week. Overcharging may shorten its lifespan. • Extreme temperatures can affect the ability of your battery to charge. Battery needs the fit temperature.
pen causes direct connection of the positive (+) and negat ive (-) terminals of the battery. (These look like metal strips on the battery.) Short-circuiting the terminals may damage the battery or the connecting object. • Leaving the battery in hot or cold places, such as in a closed car in summer or a freezer in winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59°F and 77°F (15°C and 25°C).
of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. • Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. • Do not store the device in cold areas.
detergents to clean the device. • Do not paint the device Paint can clog the moving parts and prevent proper operation. • Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices. All of the above suggestions apply to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. 7.
Networks: GSM Battery work times refer to the list below (Will not announce if the capacity is changed): The operation time of the battery depends on conditions such as: • Transmitting power level • Signal (distance between the phone and the base station) • Network parameters defined by the operator • Phone use (WAP, games, SMS) • Charging procedure used Exclusions: Subject to the exclusions contained below: 1. Damage due to the improper use. 2. User does not follow the manual.
Software upgrades will not be announced. All the configurations mentioned in this user manual is only for reference; please refer to the actual phone. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types I121C (FCC ID: WA6I121) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.296 W/kg and when properly worn on the body is 0.221 W/kg.
use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC WARNING This device complies with Part 15 of the FCC Rules.
to provide reasonable protection against harmful interfer ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
for help. NOTE 2: Any changes or modifications to this unit not ex pressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE 3: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
