SP-1V SPEAKER USER GUIDE
VERTU SP-1V BLUETOOTH TRAVEL SPEAKER USER GUIDE VERSION 1.
2 English
VERTU SP-1V BLUETOOTH TRAVEL SPEAKER Thank you for purchasing the Vertu SP-1V Bluetooth travel speaker. The SP-1V speaker allows you to enjoy your media and make conference calls wirelessly over Bluetooth. You can use the SP-1V speaker with all Vertu phones and devices that are Bluetooth enabled and have the right specifications. For details, see Specifications on page page 18.
PACKAGE CONTENTS • Bluetooth travel speaker • Wall charger AC-32V with regional plugs • Micro USB cable 1200 mm (CA-225DV) • Audio cable with 3.5 mm to 3.
BLUETOOTH TRAVEL SPEAKER 1 Answer or reject a call 2 Volume down 3 Volume up 4 Enter or exit Bluetooth pairing mode 1 2 3 4 English 5
BLUETOOTH TRAVEL SPEAKER 6 1 Micro USB port 2 3.
LED STATUS INDICATOR Colour of the light Speaker status Flashing white Switched on Flashing blue In Bluetooth pairing mode Flashing green Charging Constant green Fully charged Constant red Power is low 1 LED status indicator 1 English 7
CHARGING THE BLUETOOTH TRAVEL SPEAKER 1 8 2 English
CHARGING THE BLUETOOTH TRAVEL SPEAKER CONNEC TING THE SPEAKER TO YOUR DEVICE WITH BLUETOOTH • Fully charge the speaker before you use it for the first When you switch on the speaker for the first time, it automatically enters pairing mode. • Use the supplied AC-32V charger. If the speaker does not enter pairing mode, you can use manual pairing or simple secure pairing. time. • Fully charge the speaker every six months, even if you don’t use it. You can use the speaker while it charges.
MANUAL PAIRING 1. Press and hold the Bluetooth pairing button for 2 seconds. 1 Bluetooth pairing button 2. There is a sound and the LED indicator flashes blue. 3. Enable Bluetooth on your device. 4. From your device, add or search for devices. 5. From the list, select Vertu SP-1V. 6. If you are asked for a pass code, enter 0000.
SIMPLE SECURE PAIRING WITH NFC To use simple secure pairing, your device must be NFC-enabled. 1 1 NFC area • Put your NFC-enabled device over the NFC area. The SP-1V speaker powers up when it detects your device. The LED indicator flashes white and then flashes blue. When the indicator flashes blue, the speaker and the device are connected.
CONNECTING THE SPEAKER TO YOUR DEVICE WITH THE AUDIO CABLE 1 12 2 English
LISTENING TO MUSIC INCOMING CALLS 1. Connect the speaker to your device. If you are connected to your phone, incoming calls and messages take priority over media. You hear your ringtone through the speaker. 2. Navigate to the media player on your device and play your music. For best results: • Set the volume on your device to maximum and adjust • Note: If your phone does not support the ringtone transfer feature, the speaker uses its own default ring tone. the volume on the speaker.
MAKING HANDS-FREE AND CONFERENCE CALLS If you can make hands-free and conference calls with your phone, then you can make them with the SP-1V speaker. You can answer and reject calls with your phone, or with the call button on the speaker.
DIALLING WITH THE SPEAKER • If your phone supports voice dialling with Bluetooth, press the call button to activate voice dialling mode. ANSWERING CALLS WITH THE SPEAKER 1. Press the call button on the speaker. The call is played through the speaker. 2. To end the call, press the call button. If you were listening to music before the call, the speaker resumes playing music. Some phones might play the call through the phone. You might need to select the speaker as the audio device for hands-free calls.
TROUBLESHOOTING Sound is distorted Unable to connect the speaker to my device with Bluetooth • Reduce the volume on the speaker. If the speaker volume is • Check that no other Bluetooth devices are connected to the speaker. • Check that your device is Bluetooth compatible and that Bluetooth is switched on. Unable to connect the speaker to my device with NFC • 16 Check that your device is NFC enabled and that NFC is switched on. English at the lowest setting, reduce the volume on the device.
No sound or too quiet The speaker turned itself off • On the Bluetooth setting menu of your device, check that your • Turn the speaker on. On the Bluetooth setting menu of your • Check that the speaker is not in pairing mode. The LED If the speaker does not receive a signal for 15 minutes, it powers off automatically. • If you are using the Bluetooth connection, check that the • Check that the speaker is fully charged.
SPECIFICATIONS Bluetooth Audio • Wireless Range: 10 m minimum point to point line of sight • Power rating nominal 5 W, maximum 8 W per channel • Built-in microphone x1 • Frequency Response: 60 Hz - 35 kHz • Maximum output power 6 Watts x2 • Support 3.5 mm line-in using Northern American standard • Approximately 16 hours of continuous play measured at 1 Watt over Bluetooth. Varies by volume level and audio content.
SUPPORTED BLUETOOTH PROFILES DIMENSIONS • Advanced Audio Distribution Profile (A2DP) 1.2 190 mm W x 60 mm D x 61 mm H • Hands-Free Profile (HFP) 1.6 • Headset Profile (HSP) 1.2 • Audio Video Remote Control Profile (AVRCP) 1.5 SPEAKER MEMORY The speaker remembers up to 8 paired devices. If you pair a ninth device, the speaker deletes the device that you used least recently.
CARING FOR THE COMPONENTS OF YOUR SP-1V TRAVEL SPEAKER Do: Do not: • Keep all components dry and free of dust and dirt. • Use or store the components in hot or cold places. • Clean the components with a soft cloth. • Drop, knock or shake the components. • Use harsh or abrasive chemicals, cleaning solvents or strong detergents to clean the components. • Paint the components. If you think that the speaker is not working correctly, take it to your nearest Vertu authorised service facility.
NICKEL EXPORT CONTROLS The surface of this product is nickel-free. Your Vertu Bluetooth travel speaker (SP-1V) may contain commodities, technology, or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. RoHS STATEMENT This Product does not contain any of the substances, listed in accordance with EU RoHS (Restriction of Hazardous Substances) Directive 2011/65/EU.
DECLARA TION OF CONFORMITY We, Vertu, declare, under our sole responsibility, that the product, Bluetooth travel speaker, type SP-1V and the USB Wall Charger, type AC-32V are in conformity with the provision of Council Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.vertu.com. 22 English EU RECYCLING NOTICE Vertu complies with European Community requirements for the recycling of Waste Electrical & Electronic Equipment (WEEE).
This symbol indicates that the Product was put onto the market after the WEEE legislation was implemented, and that the consumer should not dispose of the Product as normal household waste or unsorted municipal waste, but that it should be appropriately recycled. If you want Vertu to recycle your Product at the end of its life, please either return it to the point from which you purchased it (if known), or return it to Vertu’s headquarters.
FCC INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARRANTY The warranty period Vertu provides for this product is 12 months. For details please visit the local Vertu online warranty text web site www.vertu.com Copyright © 2014 Vertu Corporation Ltd. All rights reserved. © 2012 CSR plc and its group companies. The APTX® mark and the APTX logo are trademarks of CSR plc or one of its group companies and maybe registered in one or more jurisdictions. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
vertu.
