Specifications

ALARM CLOCK
English
59
9 ALARM CLOCK
You can set your Vertu phone to sound an alarm at a desired time.
The alarm will sound even if your Vertu phone is switched off.
If you are using the Accurate time feature, you do not need to reset
the
alarm when you reach your destination. Your Vertu phone
automatically adjusts to the local time, and any preset alarms sound
at the usual time.
For information about the Accurate time feature, refer to “Time
Management” on page 40.
Setting the alarm
To set the alarm:
1. From the stand-by display, press
Menu » Alarm clock.
2. Use the NUMBER keys
to enter the time you want the alarm to
sound.
3. Press
Options and use the up and down navigation keys to set
the alarm details.
Alarm: use the left and right navigation keys to toggle the alarm
on and off.
Alarm time: displays the time the alarm is set for and can only be
changed as above
Repeat: use the left and right navigation keys to toggle the
repeat feature on and off. Setting the repeat feature to
On means
that the alarm will sound every day at the specified time
Repeat days: press Options and Change to select the days
on which you want the alarm to repeat. This option is only available if
Repeat: is switched On
Alarm tone:
use the left and right navigation keys to select an
alarm tone
Classic is the default alarm tone
Open Gallery enables you to select a tone from the gallery
files on your Vertu phone
Alarm Tones enables you to select a tone from a list
Tone downloads enables you to select and download a tone
from website
Snooze time-out: use the NUMBER keys to enter the snooze
time-out in minutes
4. Select
Save when complete.
A message confirms that the alarm is on and a small bell icon is
visible
on the stand-by display.
If the clock is displayed in
Analogue mode, a red alarm indicator is
displayed on the face of the clock in stand-by mode. The alarm
indicator displays the time that the alarm is set for.
Cancelling the alarm
To cancel the alarm:
1. From the stand-by display, press
Menu » Alarm clock » Turn
alarm off
.
A message confirms that the alarm is off.
Changing the alarm time
1. From the stand-by display, press Menu » Alarm clock »
Change alarm time.
2. Modify the alarm time, and press
OK to save.
Turning off the alarm
To turn off a ringing alarm:
1. When the alarm sounds press
Stop.
2. If your Vertu phone is switched off when the alarm sounds, a message
asks
if you want to switch the phone on. Press
Yes to switch the
phone on or press
No to leave the phone switched off.
Do not press Yes when wireless phone use is prohibited or when
it may cause interference or danger.
Activating the snooze function
To activate the snooze function:
1. When the alarm sounds press
Snooze.
2. The alarm will sound again after the Snooze time-out duration defined
when
setting the alarm.
3. If you leave the alarm ringing, it will ring for approximately one minute
and
then go into snooze mode.