Specifications

SETTINGS
English
48
Flight mode
You can deactivate all radio frequency functionality and still have
access to offline games, calendar and phone numbers. Use Flight
mode in areas sensitive to radio emission, on board aircraft and in
hospitals.
When
Flight query is enabled, your Vertu phone will ask if you
wish to switch to Flight mode when you switch the phone on. To
activate or deactivate Flight mode query:
1. From the stand-by display, press
Menu » Settings » Phone »
Flight query.
2. Scroll to
On or Off and then press Select.
In Flight mode you can make an emergency call. Enter the
emergency
number, press the CALL key and select
Yes when
asked if you want to exit the Flight mode profile. The phone attempts
to make the emergency call and then automatically reverts to
General profile when the call has ended.
To manually activate or deactivate Flight mode profile:
1. From the stand-by display, press
Menu » Settings » Profiles »
Flight » Activate or Personalise.
To deactivate the Flight mode, select any other profile.
Phone updates
Enables you to update your phone’s software if there is an update
available.
1. From the stand-by display, press
Menu » Settings » Phone »
Phone updates.
2. Select one of the following options:
Current softw. details displays current phone software details
Downl. phone softw. enables new phone software to be
downloaded
Install softw. update enables newly downloaded software to
be installed on your phone
Software update provider displays your software update
provider
Automatic SW update check enables your phone to
automatically check for updates
Every month, Every 3
months
or Never.
Network mode
Enables you to switch between GSM networks and dual mode -
3G+GSM.
You can disable 3G from the Go to menu to maximise battery
performance. 3G enables faster data downloading and is a
necessity if you are roaming in Japan.
To change the network mode:
1. From the stand-by display, press
Menu » Settings » Phone »
Network mode.
2. Choose from
3G, 3G+GSM and GSM and press Select.
Operator selection
You can select your network operator manually or your Vertu phone
will select one automatically. See “Set up manual roaming” on
page 65.
To change your operator selection setting:
1. From the stand-by display, press
Menu » Settings » Phone »
Operator selection.
2. Scroll to one of the options and then press Select:
Manual displays all the locally available networks. Select the
one you want to use.
Automatic selects the default network for the area you are in.
Start-up tone
To select whether or not your Vertu phone plays a tone when the
phone is switched on:
1. From the stand-by display, press
Menu » Settings » Phone »
Start-up tone.
2. Scroll to On or Off and then press Select.
Enhancements
This menu is shown only if the phone is or has been connected to a
compatible mobile accessory, such as a desk stand, charger or
headset.
1. From the stand-by display, press
Menu » Settings »
Enhancements.
2. Scroll to one of the options and then press
Select (available options
will depend upon the enhancement selected):
Default profile enables you to select the profile that you want to
be automatically activated when you connect to the selected
enhancement
Automatic answer sets the phone to answer an incoming call
automatically after 5 seconds. If Incoming call alert is set to
Beep
once
or Off, automatic answer is off
Lights sets the lights permanently On or select Automatic to
set the lights on for 15 seconds after a key press.