User guide

4 English
GETTING STARTED
Switching your Vertu phone on
The battery may not be fully charged when you receive it. If a
Battery low message is displayed when you first switch on your
Vertu phone please see “Charging the battery” on page 11 for more
information.
Using the keypad
4-way scroll keys
The 4-
WAY SCROLL key enables you to move the cursor around the
display quickly and easily in any direction. Press each edge of the
key to move the cursor in the direction of the arrow on the key.
Centre select key
The
CENTRE SELECT key in the middle of the
4-
WAY SCROLL key enables you to select the option displayed
directly above the key.
Virtual keys
Virtual keys appear on some screens, for example messaging
screens. Use the 4-
WAY SCROLL key to move between the virtual
keys and press the
CENTRE SELECT key to select the highlighted
key.
Selection keys
The
SELECTION keys enable you to select the options displayed at
the bottom of the display, directly above the keys.
Entering your PIN code
Depending on your SIM card settings, you may be prompted to
enter a PIN (Personal Identification Number) code when you switch
on your Vertu phone. This code is used to protect access to your
SIM card and is independent of your Vertu phone. If you have
previously used your SIM card in another phone, the PIN code will
be the same.
Setting the time and date
When you first switch on your Vertu phone you will be prompted to
enter your time and date settings if they are not already set up.
Use the 4-
WAY SCROLL key to enter the time. Press OK to confirm
the time. Enter the date using the 4-
WAY SCROLL key. Press OK to
confirm the date.
Display icons and indicators
The display shows the current status of your Vertu phone.
> Press and hold the
POWER key to switch
on your Vertu phone.
> Use the NUMBER
keys to key in your
PIN code.
> Press OK
If the battery is removed from your Vertu
phone for longer than one hour and twenty
minutes, you may need to set the time and
date again.
The signal strength
indicator appears at the
top left of the display. The
battery charge indicator
appears at the top right of
the display.
This picture shows a
strong signal.
This picture shows that
the signal strength is too
weak to make calls. Move
to an area clear of
obstructions that may
block the signal.