User guide

40 English
SETTINGS
Cancel cancels the disable call waiting
Check status displays whether the option is active and for which
type of call.
To use the call waiting feature:
1. When you have a call in progress and you receive an incoming call,
you will hear an audible alert and the display indicates that another
call is waiting. Press the
SEND key to answer the call. The person you
were speaking to is put on hold. Call waiting may not work correctly if
Divert if busy is set.
2. Press the
SEND key to swap between the calls. A confirmation
message is displayed. The person on hold becomes the active call,
and the other person is put on hold.
3. Press the
END key to end the active call. A confirmation message is
displayed and the other call becomes active.
4. Press
Options then scroll to End all calls and then press
Select to end all calls.
Summary after call
Your Vertu phone can display the time spent on a call.
To change the call summary setting:
1. From the stand-by display, press
Menu » Settings » Call »
Summary after call
.
2. Scroll to
On to enable summary after call, or Off to disable it and
then press
Select.
Phone settings
You can personalise the following options on your Vertu phone
using this menu.
Language settings
1. From the stand-by display, press Menu » Settings » Phone »
Language settings
.
2. Scroll to one of the options and then press
Select.
Phone language enables you to set the display language of your
Vertu phone. If you select
Automatic, the phone selects the
language according to the information on the SIM card
SIM language enables you to select the USIM card language
Voice playback language enables you to set a language for
the voice playback. See “Voice commands” on page 37.
Memory status
1. From the stand-by display, press Menu » Settings » Phone »
Memory status
.
2. Scroll through the options to see how much of your Vertu phone’s
memory is being used to store media, messages and
applications and how much free space is available.
Security keyguard
To set your Vertu phone to ask for the security code when you
unlock the keyguard: (See Automatic keyguard below)
1. From the stand-by display, press
Menu » Settings » Phone »
Security keyguard
.
2. Enter your Security code (see “PIN code” on page 20) and select
On.
Automatic keyguard
To set the N UMBER keys of your Vertu phone to lock automatically
after a preset time delay when the phone is in the standby mode and
no function of the phone has been used:
1. From the stand-by display, press
Menu » Settings » Phone »
Automatic keyguard.
2. Select
On, and use the N UMBER keys to enter the time delay.
Welcome note
1. From the stand-by display, press Menu » Settings » Phone »
Welcome note
.
2. Use the N
UMBER keys to write the note you would like to be shown
briefly when the phone is switched on and press
Save.
Operator selection
1. From the stand-by display, press Menu » Settings » Phone »
Operator selection
.
2. Select
Automatic to set the phone to automatically select one of
the cellular networks available in your area or select
Manual to
display the networks available in your area.
Start-up tone
To select whether or not your Vertu phone plays a tone when the
phone is switched on:
1. From the stand-by display, press
Menu » Settings » Phone »
Start-up tone
.
2. Scroll to
On or Off and then press Select.
Enhancements
This menu is shown only if the phone is or has been connected to a
compatible mobile accessory.
1. From the stand-by display, press
Menu » Settings »
Enhancements
.
2. Scroll to one of the options and then press
Select (available
options will depend upon the enhancement selected):
Default profile enables you to select the profile that you want to
be automatically activated when you connect to the selected
enhancement
Automatic answer sets the phone to answer an incoming call
automatically after 5 seconds. If Incoming call alert is set to
Beep
once
or Off, automatic answer is off
Lights sets the lights permanently on or select Automatic to set
the lights on for 15 seconds after a key press
Ignition detector and select On automatically switches off the
phone about 20 seconds after you switch off the car ignition when
the phone is connected to the full car kit.
When the keyguard is on, calls still may be possible to the
official emergency number programmed into your device.
The selected network may not have a roaming agreement
with your operator in which case No network access will
be displayed.