User guide

SETTINGS
English 39
Data transfer with a compatible device
Bluetooth wireless technology can be used for synchronisation. The
other device should be in the standby mode.
To start data transfer:
1. From the stand-by display, press
Menu » Settings »
Connectivity
» Data transfer.
2. Scroll to the required entry in the Partner list (other than
Server
sync
or PC sync) and then press Select.
According to the settings, the selected data is copied or
synchronised. The other device also must be activated for receiving
data.
Synchronise from a compatible PC
Before you synchronise data from calendar, notes, and contacts
with a PC, you must install the Vertu PC Suite software on a
compatible PC. Use Bluetooth wireless technology, or a USB data
cable for the synchronisation, and start the synchronisation from the
PC.
Synchronise from a server
To use a remote Internet server, you must subscribe to a
synchronisation service. For more information and the settings
required for this service, contact your service provider. You may
receive the settings as a configuration message.
If you have saved data on the remote Internet server, to synchronise
your Vertu phone, start the synchronisation from your phone:
1. From the stand-by display, press
Menu » Settings »
Connectivity
» Data transfer » Server sync.
2. Depending on the settings, select
Initialising sync or
Initialising copy.
Synchronising for the first time or after an interrupted
synchronisation may take up to 30 minutes to complete, if the
contacts or calendar are full.
Call settings
You can personalise the way your Vertu phone behaves during a
call by using the call settings.
Call divert
The call divert feature redirects your incoming calls to another
number, for example your voice mailbox number.
When a call is diverted your Vertu phone does not give any
indication of an incoming call.
To manage your call divert settings:
1. From the stand-by display, press
Menu » Settings » Call » Call
divert
2. Scroll to one of the divert options and then press Select:
Divert all voice calls forwards all calls to the number you
specify
Divert if busy forwards all calls when you are in a call
Divert if not answered forwards all calls to another number
when you do not answer. You can also set a delay before forwarding
takes place
Divert if out of reach forwards all calls when your Vertu phone
is turned off or out of the coverage area
Divert if not available forwards all calls when you do not
answer, your Vertu phone is busy or turned off, or out of the coverage
area. You can also set a delay before forwarding takes place
Divert all fax calls redirects all fax calls to a fax number
Divert all data calls forwards all data calls to a data mailbox.
Scroll to one of the following and then press
Select:
Activate sets up the divert. Use the N UMBER keys to enter the
divert number or select a contact and then press OK
Cancel cancels the divert
Check status displays the current status of the divert. A progress
indicator appears, followed by an information note indicating whether
the divert is active and to which number.
Cancel all diverts
cancels all call diversions.
Anykey answer
Anykey answer allows you to answer an incoming call by briefly
pressing any key except the
POWER key, SELECTION and E ND keys.
To change the anykey answer setting:
1. From the stand-by display, press
Menu » Settings » Call »
Anykey answer
.
2. Scroll to
On to enable Anykey answer, or Off to disable it and then
press
Select.
Automatic redial
Occasionally, your network may experience heavy traffic and you
might not be able to make a call. With automatic redial activated,
your Vertu phone redials the number up to 10 times, and notifies
you once the network is available.
To change the automatic redial setting:
1. From the stand-by display, press
Menu » Settings » Call »
Automatic redial
.
2. Scroll to
On to enable automatic redial, or Off to disable it and then
press
Select.
Speed dialling
Single key speed dialling enables you to quickly dial a number by
pressing and holding a single key.
To change the speed dialling setting:
1. From the stand-by display, press
Menu » Settings » Call »
Speed dialling
.
2. Scroll to
On to enable speed dialling, or Off to disable it and then
press
Select.
Call waiting
Call waiting notifies you of an incoming call while you are in another
call. You can accept, reject, or ignore the incoming call. Contact
your service provider for more details.
To change the call waiting setting:
1. From the stand-by display, press
Menu » Settings » Call » Call
waiting
.
2. Scroll to one of the options and then press
Select:
Activate enables call waiting
Cancelling all call diversions may affect your ability to receive
voice mail messages. Some service providers may not allow
cancelling of all diversions. Contact your service provider for
specific details.