User guide

GETTING STARTED
English 3
Inserting the battery and SIM card
The SIM card and its contacts are easily damaged. Be careful when
handling, inserting or removing the card.
Removing the back cover
> With the back of your Vertu phone facing you, position the back
cover release key (01) into the slot of the locking screw (02).
> Turn the locking screw (02) a quarter of a turn anticlockwise, and
gently lift off the back cover as shown.
> Remove the plastic placeholder (03) from your Vertu phone before
inserting the battery.
Inserting the SIM card
> Insert the SIM card partially into the SIM card compartment,
ensuring that the bevelled corner (04) is located bottom right and
the gold contact area is facing downwards.
Inserting the battery
> Position the battery so that the contacts align with the contacts in
the battery compartment (05). Lower the battery into the battery
compartment, pushing the SIM card fully into the SIM card
compartment.
> Ensure that the battery and SIM card are seated correctly before
replacing the back cover.
Replacing the back cover
> To replace the back cover, locate the internal clip (06) as shown.
> Lower the back cover into position until it clicks into place. The cover
should close tightly using only light pressure – do not force it closed!
Using your Vertu phone
To help you start using your Vertu phone as quickly as possible,
please read the following information carefully.
Keep SIM cards and the back cover release key
out of the reach of small children.
Always switch the phone off and disconnect the
charger before removing the battery.
Retain the plastic placeholder for future use. If
you need to remove the battery, insert the
plastic placeholder before replacing the back
cover to make it easier to remove the back
cover.





