User manual

03 THE MENUS
VERTU
3-20
PROFILES
The profiles feature allows you to set up different
audible alerts. Six profiles are available on your
Vertu phone.
PROFILE ICONS
To help you identify which profile is active, one of the
following icons appear in the stand-by display, below the
signal strength indicator.
ACTIVATING A PROFILE
To change a profile from the stand-by display:
> Press the POWER key once briefly.
> Scroll to the desired profile.
> Press ok. A confirmation message appears.
general
silent
soft
loud
pager
headset
. Only available after the Vertu
headset has been connected for the first
time.
> From the stand-by display,
press
menu.
> Scroll to profiles.
> Press select.
> Scroll to the required
profile.
> Press options. activate is
highlighted.
> Press ok. A confirmation
message appears.
PERSONALISING A PROFILE
Several options are available and are accessed as
follows:
> From the stand-by display,
press
menu.
> Scroll to profiles.
> Press select.
> Scroll to the desired
profile.
> Press options.
> Scroll to personalise.
> Press ok.
incoming call alert
Set the type of audible alert
your Vertu phone uses to
alert you of an incoming call.
incoming call alert
appears after you access
the
personalise submenu.
> Press select.
> Scroll to one of the
following:
ringing,
ascending, ring once,
beep once or off (no
audible alert for an
incoming call).
> Press select. A
confirmation message
appears.
ringing tune
Set the ringing tune your
Vertu phone uses to alert
you of an incoming call.
> Scroll to ringing tune.
> Press select.
> Scroll through the ringing
tunes, pausing at each
name to hear the tune.
> Scroll to the desired
ringing tune.
> Press ok. A confirmation
message appears.
Usermanual.book Page 20 Wednesday, January 26, 2005 3:17 PM