User's Manual
Table Of Contents
- contents
- about this manual
- care and maintenance
- welcome
- Hallmarks
- battery information
- safety points
- 01 getting started
- 02 the menus
- 03 the directory
- 04 advanced call functions
- 05 accessories
- 06 security information
- appendix 1 short-cuts
- Safety information
1-3
N
o
.
01 getting started
PHONE KEYS
Alphanumeric keys (referred to as
ALPHA
keys in this
guide) are used to enter (key in) numbers or characters
for calling, storing names in the directory or creating
text messages.
Should you require any assistance, please refer to our
Vertu Concierge service, see 1-10.
> Locate lugs (F) as shown.
> Rotate the back cover back into position. It should
click into place.
F
F
SWITCHING ON YOUR PHONE
Your Vertu phone has built in security that protects it
against unauthorised use. Should you change or install a
different SIM card, you are prompted to enter your
security code when you first switch on.
If the display below does not appear when you first
switch on, please proceed to setting the time and
date on the next page. Alternatively follow the
procedure shown to key in your security code.
The phone software recognises one SIM card at a time,
should you remove this SIM card and re-insert it, the
phone software recognises it and the phone remains
operational.
Should you insert any other SIM cards, the security
code will require keying in.
If your normal SIM card has been swapped for another
and you subsequently re-insert your original one, the
security code will require keying in again.
We recommend that the security code is changed to
a number of your choice see
security code
on
page 6-2
.
Additional security features are also
detailed in the security information chapter.
> Press the
POWER
key (01)
and hold for two seconds
to switch the phone on.
> Key in 12345
> Press
ok
Your phone is now
operational.
01
!
!!!
!
!!!ok!!!!!!!!!!!!clear
se cu rity! code:
!!
*****!