Specifications

17
Getting started
Switching on your Vertu phone
Press and hold the Power key (shown below) to switch on your Vertu phone.
The battery may need charging when you first receive your Vertu phone. Use the
micro USB cable to connect to the charger or PC to charge the phone.
A list of options appears when you press the Power key:
Locking and unlocking the keypad
You can lock the keypad on your Vertu phone to prevent operating them accidentally.
The keypad lock (shown above) slides to lock the keypad. Slide it again to free the
keypad lock.
When the keypad is locked, a key icon appears. When you receive an incoming
call, the keypad lock is automatically released. When the call is ended, the keypad
relocks.
Automatic keyguard
Set the keyguard to automatically lock the keypad when the phone has not been used
for a set time period.
To set up automatic keyguard:
1. On the home screen, select Menu > Ctrl. Panel > Settings > General >
Security > Phone and SIM card > Keypad Autolock Period.
2. Press the Middle Select key and either enter a time in minutes for the autolock
period or select None if you do not want to use this feature.
For more information on phone security, refer to “Security Settings” on page 32.
Options Description
Switch off Switches off the phone
Lock keypad Locks the keypad
General Activates the General profile
Silent Activates the Silent profile
Meeting Activates the Meeting profile is activated
Outdoor Activates the Meeting profile is activated
Pager Activates the Meeting profile is activated
Offline Puts the phone in offline mode (in this mode, you are
no longer connected to the network)
Lock phone Locks the phone
Activate power saving Switches to power saving mode
Keypad lock
Power key
TIP: You can also lock the keypad by pressing the Left Select key, followed
by the Right Select key.