Manualshelf

User guide

ManualsBrandsVertu ManualsPrint & ScanASCENT X
81828384858687888990
81
Settings
Viewing access point details
To view details of the access points stored on your Vertu phone:
1. From the Home screen, select Menu > Settings > Configuration.
2. Select Preferred access pt. The list of access points is displayed.
3. Scroll to the required access point, then select Options > Details.
Setting a default access point
To set a default access point:
1. From the Home screen, select Menu > Settings > Configuration.
2. Select Preferred access pt.
3. Select the required access point.
Downloading configuration settings from your service provider
To download configuration settings from your service provider:
1. From the Home screen, select Menu > Settings > Configuration.
2. Select Connect to support.
Adding configurations
To add a configuration:
1. From the Home screen, select Menu > Settings > Configuration.
2. Select Personal config. sett.
3. Select Add.
4. Select the type of setting you will add.
5. Enter the required settings.
Activating a personal configuration
To activate a personal configuration:
1. From the Home screen, select Menu > Settings > Configuration.
2. Select Personal config. sett.
3. Scroll to the required configuration, then select Options > Activate.
Deleting a personal configuration
To delete a personal configuration:
1. From the Home screen, select Menu > Settings > Configuration.
2. Select Personal config. sett.
3. Scroll to the required configuration, then select Options > Delete.
4. Select Yes to confirm the deletion.
Security
For information on security settings, see the Security section.
IMPORTANT: Before activating a configuration for all applications, you
need to ensure that the configuration supports all of the applications that
you need. Some applications may not work if they are not supported by the
default configuration.
NOTE: This setting is only available if it is supported by your service
provider.
NOTE: Before adding a configuration, you will need to obtain the required
settings from the relevant service provider.
TIP: To add more configurations, select Options > Add new.