User guide

79
Settings
Operator selection
You can select whether your Vertu phone will automatically search and select a
network to connect to, or whether you will be prompted to select one manually.
You may need to manually select a network when you are travelling.
Setting the operator selection type
To set the operator selection type:
1. From the Home screen, select Menu > Settings > Phone.
2. Select Operator selection.
3. Select Automatic or Manual as required.
If you select Automatic, your Vertu phone will register to the default network. This
network is defined by your SIM card.
If you select Manual, you can select the network to connect to.
Manually connecting to a network
To manually connect to a network:
1. From the Home screen, select Menu > Settings > Phone.
2. Select Operator selection.
3. Select Manual.
4. Wait for your Vertu phone to search for all available networks.
5. When the list of networks is displayed, select the required network. Your phone
will attempt to register to the selected network.
Start-up tone
To deactivate the tone that is played when your Vertu phone starts up:
1. From the Home screen, select Menu > Settings > Phone.
2. Select Start-up tone.
3. Select Off.
Confirm SIM actions
To set your Vertu phone to display confirmation messages sent between the phone
and the network when you are using the SIM services:
1. From the Home screen, select Menu > Settings > Phone.
2. Select Confirm SIM actions.
3. Select Yes.
NOTE: This setting is only available if it is supported by your service
provider.