Manualshelf

User guide

ManualsBrandsVertu ManualsPrint & ScanASCENT X
51525354555657585960
56
Messages
To set the validity of all sent text messages:
1. From the Home screen, select Menu > Messages.
2. Select Message settings > Text messages.
3. In the Message validity field, select the required time. A confirmation message
is displayed.
To set the message format for all sent text messages:
1. From the Home screen, select Menu > Messages.
2. Select Message settings > Text messages.
3. In the Messages sent via field, select Text/Paging/Fax as required. A
confirmation message is displayed.
To change the text message bearer setting to GPRS:
1. From the Home screen, select Menu > Messages.
2. Select Message settings > Text messages.
3. In the Use packet data field, select Yes. A confirmation message is displayed.
You can select the character support required when creating a text message. The
setting can be either Full or Reduced.
Full character support means that the full set of ISA characters is available when
creating and sending a message. All characters in text messages are sent as they
appear when creating the message. This is the default setting.
Reduced character support means that only the 7-bit GSM characters are used when
sending a text message. The character set available when creating a text message
depends on the editor support. Special characters are converted when the message
is sent.
To set the character support for text messages:
1. From the Home screen, select Menu > Messages.
2. Select Message settings > Text messages.
3. In the Character support field, select Full or Reduced as required. A
confirmation message is displayed.
You can set the reply path so that if a recipient of a text message that you have sent
replies, the reply will be sent using the same text message service centre that you
used for sending the original message.
To set the reply path to be the same as the sending path:
1. From the Home screen, select Menu > Messages.
2. Select Message settings > Text messages.
3. In the Rep. via same centre field, select Yes. A confirmation message is
displayed.
NOTE: This setting is only available if it is supported by your service
provider.
NOTE: This setting is only available if it is supported by your service
provider.
NOTE: Problems can occur if the message recipient has a different service
provider.