User guide

112
Camera
To set the brightness for the photo:
1. From the camera, select Options > Brightness.
2. Move the Joystick up to increase the brightness or down to decrease the
brightness.
3. Press the Joystick when the level is correct.
To select effects for the photo:
From the camera, select Options > Effects, then select the required effect from the
following:
• Normal - this is the default option for colour photos.
• Greyscale - to take a black and white photo.
• Sepia - to take a photo with a sepia tone that gives an aged appearance.
• Negative - to take a photo with reversed colours.
To select the white balance for the photo:
From the camera, select Options > White balance, then select the required option
from the following:
• Auto - to adjust the white balance automatically to reproduce natural colours.
• Daylight - for use when taking photos outside in natural daylight.
• Tungsten - for use when taking photos under electric lighting.
• Fluorescent - for use when taking photos under fluorescent lighting.
Photo settings
To set the image quality for photos:
1. From the camera, select Options > Settings.
2. Select Image quality.
3. Select High/Normal/Basic as required. A confirmation message is displayed.
To set the image size for photos:
1. From the camera, select Options > Settings.
2. Select Image size, then select the required image size. A confirmation message
is displayed.
To set the image preview time for photos:
1. From the camera, select Options > Settings.
2. Select Image preview time.
3. Select a time for the preview if required. Select No preview to return to the main
camera screen immediately after taking a photo. Select End manually for the
preview to not time out automatically. A confirmation message is displayed.
NOTE: Images of higher quality will use more storage space.