User guide

110
Navigate
Navigation settings
To access the navigation settings:
From the Home screen, select Menu > Navigate > Settings.
To select the required type of measurement units:
1. Select General settings.
2. In the Unit of measure field, select Metric or Imperial as required. A
confirmation message is displayed.
To select the points of interest to display on the maps:
1. Select General settings > Points of interest.
2. Scroll to the items that you would like displayed, then select Mark to select them.
3. Select Done when you have finished.
4. Select Yes to save the changes. A confirmation message is displayed.
To select the backlight setting for the Navigate feature:
1. Select General settings.
2. In the Lights field, select one of the following settings:
• Automatic - to set the backlight to follow the usual phone behaviour.
• On for navigation - to set the backlight to be on when you are in a navigation
session. The backlight will time out as normal when you are not in a navigation
session.
• Always on in Maps - to set the backlight to be on whenever you are using the
Navigate feature.
To activate voice guidance:
1. Select General settings.
2. In the Voice guidance field, select the required language. Select OK when the
confirmation message is displayed.
To select the network usage setting:
1. Select Network settings.
2. In the Allow network usage field, select the required setting. If you select Ask
when opening, you will need to confirm the setting each time you start the
Navigate feature. For details of the other settings, see Starting navigation. A
confirmation message is displayed when you have selected the required setting.
To select the routing settings:
1. Select Routing settings.
2. In the Route selection field, select one of the following actions:
• Shorter by car - to select the route that covers the shortest distance by car.
• Faster by car - to select the route that will take the least time by car.
3. To include ferry routes, select Yes in the Ferry field.
4. To include motorway routes, select Yes in the Motorway field.
5. To include toll roads, select Yes in the Toll road field.
6. To include tunnels, select Yes in the Tunnel field.
NOTE: The first time you select a new language, you will need you wait for
a short time while the language data is downloaded to your Vertu phone.