User guide

109
Navigate
3. To plot your current position on a map, select Current position.
4. Wait while your Vertu phone locates a satellite signal. Your current position is
then displayed.
Locating an address
To locate an address:
1. Access the Navigate feature.
2. Select Find address.
3. Enter details of the required address.
4. Select Find. Your Vertu phone searches for the address and displays it in full.
5. To view the address on a map, select View map.
Using an address
Once the Navigate feature has located an address, you can use this location for a
variety of purposes.
To view the details of a location, select Options > Details.
To save the location:
1. Select Options > Save location.
2. Enter a name for the location, and select an icon for the location.
3. Select Save. The location is added to the Saved locations.
To send the location information in a message:
1. Select Options > Send location.
2. Add a recipient to the message, then select Send.
To save the address with your contacts:
1. Select Options > Save address.
2. Add the address to an existing contact, or save it as a new contact. For
information on contacts, see the Contacts section.
To plan a route to the location:
1. Select Options > Plan route to. The location is set as the destination for a route
plan.
2. Select the required starting point for the route.
3. To view the route on a map, select Options > Show route.
To plan a route from the location:
1. Select Options > Plan route from. The location is set as the starting point for a
route plan.
2. Select the required destination for the route.
3. To view the route on a map, select Options > Show route.
To navigate from your current GPS position to the location, select Options >
Navigate to.
NOTE: It may take several minutes for the phone to display the current
location. Subsequent connections should be faster, but if you have not
used GPS for several days, or are very far away from the last location where
you used it, it may take several minutes to detect and display your location.
NOTE: The minimum details needed to search for an address are the
country name, and at least two characters of the city name.
TIP: To import an address from your contacts:
1. Select Options > Insert address.
2. Select the contact whose address you want to find. The address details
are imported.
TIP: To zoom in when viewing a map, press the -key.
TIP: To zoom out when viewing a map, press the -key.