User guide

GETTING STARTED
English
4
Using your Vertu phone
To help you start using your Vertu phone as quickly as possible,
please read the following information carefully.
Switching your Vertu phone on and off
The battery may not be fully charged when you first receive your
Vertu phone. If a
Battery low message is displayed when you first
switch on your Vertu phone please see “Charging the battery” on
page 11 for more information.
The joystick
Selection keys
Virtual keys
Setting the time and date
When you first switch on your Vertu phone you will be prompted to
enter your time and date settings if they are not already set up.
Use the JOYSTICK and NUMBERkeys to enter the time. Press OK
to confirm the time. Enter the date using the JOYSTICK and
NUMBERkeys. Press
OK to confirm the date.
Making a call
Answering a call
When you receive an incoming call, a ringing tone is played and a
call message is displayed. Your Vertu phone will also vibrate if you
have set a vibrating alert.
Adjusting listening volume
Ending or rejecting calls
Sending a text message
> Using the JOYSTICK go to:
Menu » Messages » Create message » Message
Bluetooth is switched on.
A 3G UMTS connection is active.
A GPRS connection is active.
Press and hold the POWER
key to switch your Vertu
phone on or off.
The JOYSTICK enables
you to move the cursor
around the display in any
direction.
The SELECTION keys
enable you to select the
options displayed at the
bottom of the display,
directly above the keys.
Virtual keys appear on
some screens, for example
messaging screens. Use
the JOYSTICK to move
between the virtual keys
and to select the
highlighted key.
If the battery is removed from your Vertu phone for longer than
an hour, you may need to reset the time and date.
Check that you are in a
strong signal area and the
battery is charged.
Use the NUMBER keys to
enter the telephone number
you want to call.
Press the SEND key to
begin your call.
When calling international numbers, press the key twice to
display a + sign.
Press the SEND key to
answer an incoming call or
press the JOYSTICK when
you see
Answer on the
screen.
To change the earpiece
volume while you are in a
call, move the JOYSTICK
up or down.
While in a call, you can use the speaker phone for a hands-free
call. Use the SELECTION keys to press Loudsp. to switch to
speaker phone.
Press the END key to end a
call or reject an incoming
call.