User guide

SETTINGS
English
45
Synchronise from a server
To use a remote Internet server, you must subscribe to a
synchronisation service, e.g. Vertu Fortress (see “Vertu Fortress” on
page 10). For more information and the settings required for this
service, contact your service provider. You may receive the settings
as a configuration message.
If you have saved data on the remote Internet server, to synchronise
your Vertu phone, start the synchronisation from your phone:
1. From the stand-by display, press Menu » Settings »
Connectivity » Data transfer » Server sync.
2. Depending on the settings, select Initialising
syn-chronisation
or Initialising copy.
Synchronising for the first time or after an interrupted
synchronisation may take up to 30 minutes to complete, if the
contacts or calendar are full.
Micro-USB data cable
You can use the micro-USB data cable to transfer data between the
phone and a compatible computer or a printer supporting
PictBridge. You can also use the micro-USB data cable with Vertu
PC suite.
1. Connect the data cable. A message appears on the display: USB
data cable connected. Select mode.
2. Press OK to select mode and select from the following options:
Vertu PC Suite - to use the phone to interact with applications on
a computer that has Vertu PC suite installed.
Printing & media - to use the phone with a PictBridge
compatible printer, or to connect the phone to a PC to synchronize it
with Windows Media Player.
Data storage - to connect to a computer that does not have Vertu
software and use the phone as data storage.
Call settings
You can personalise the way your Vertu phone behaves during a
call by using the call settings.
Call divert
The call divert feature redirects your incoming calls to another
number, for example your voice mailbox number.
When a call is diverted your Vertu phone does not give any
indication of an incoming call. The call divert feature is managed by
your service operator and is not phone specific. The call divert
feature may remain active even if your SIM card is not currently in a
phone.
To manage your call divert settings:
1. From the stand-by display, press Menu » Settings » Call » Call
divert
.
2. Scroll to one of the divert options:
All voice calls forwards all calls to the number you specify
If busy forwards all calls when you are in a call
If not answered forwards all calls to another number when you
do not answer. You can also set a delay before forwarding takes
place
If out of reach forwards all calls when your Vertu phone is turned
off or out of the coverage area
If not available forwards all calls when you do not answer, your
Vertu phone is busy or turned off, or out of the coverage area. You
can also set a delay before forwarding takes place
All fax calls redirects all fax calls to a fax number
All data calls forwards all data calls to a data mailbox.
3. Press Select:
Activate sets up the divert. Use the NUMBER keys to enter the
divert number or select a contact and then press
OK
Cancel cancels the divert
Check status displays the current status of the divert. A
progress indicator appears, followed by an information note
indicating whether the divert is active and to which number.
No call diverts cancels all call diversions.
Anykey answer
Anykey answer allows you to answer an incoming call by briefly
pressing any key except the
POWER key, SELECTION and END keys.
To change the anykey answer setting:
1. From the stand-by display, press Menu » Settings » Call »
Anykey answer.
2. Scroll to On to enable Anykey answer, or Off to disable it and then
press
Select.
Automatic redial
Occasionally, your network may experience heavy traffic, or the
called party is busy and you might not be able to make a call. With
automatic redial activated, your Vertu phone redials the number up
to 10 times, and notifies you once the network is available.
To change the automatic redial setting:
1. From the stand-by display, press Menu » Settings » Call »
Automatic redial.
2. Scroll to On to enable automatic redial, or Off to disable it and then
press
Select.
Voice clarity
Enhances speech intelligibility especially in noisy environments.
To change the voice clarity setting:
1. From the stand-by display, press Menu » Settings » Call »
Voice clarity.
2. Scroll to Active to enable voice clarity, or Inactive to disable it
and then press
Select.
Cancelling all call diversions may affect your ability to receive
voice mail messages. Some service providers may not allow
cancelling of all diversions. Contact your service provider for
specific details.