User guide

SETTINGS
English
43
Voice commands
You can activate menu options using voice commands. Voice
commands are language-dependent, see “Language settings” on
page 46 for more information.
To hear a voice command:
1. From the stand-by display, press Menu » Settings » My
shortcuts
» Voice commands.
2. Scroll to the voice command you wish to hear and press Play.
To use a voice command:
1. From the stand-by display, press and hold the right SELECTION key.
2. When Speak now is displayed say your command.
3. If the voice recognition was successful, a list of matches is shown.
Your Vertu phone will play the voice command of the match at the
top of the list. and after about 2 seconds, your phone will carry out the
command.
4. If the match at the top of the list is not the one that you wanted, scroll
to the correct match and then press
Select.
5. If the function you require does not appear in the list, press Quit and
retry the voice command.
Connectivity
You can connect your Vertu phone to a compatible device using
Bluetooth wireless technology, or a USB data cable (CA-101V)
connection. You can also define the settings for GPRS dial-up
connections.
Bluetooth wireless technology
Your Vertu phone is compliant with Bluetooth Specification 2.0.
You can use Bluetooth car kits, perform data transfer and use your
Vertu phone as a modem.
To ensure interoperability between other devices supporting
Bluetooth technology, use Vertu approved enhancements for this
model. Check with the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to
run in the background while using other features, increase the
demand on battery power and reduce the battery life.
Bluetooth technology allows you to connect the phone to a
compatible Bluetooth device within 10 meters (32 feet). Since
devices using Bluetooth technology communicate using radio
waves, your Vertu phone and the other devices do not need to be in
direct line-of-sight, although the connection can be subject to
interference from obstructions for example walls or from other
electronic devices.
Bluetooth settings
To define how your Vertu phone is recognised by other Bluetooth
devices:
1. From the stand-by display, press Menu » Settings »
Connectivity » Bluetooth.
2. Scroll to one of the options and then press Select:
My phone’s visibilityenables you to operate the phone in
hidden mode to avoid malicious software
Active devices checks which Bluetooth connection is currently
active
3. My phone’s name enables you to define the name that you want
your Vertu phone to be recognised by on the network.
Bluetooth wireless connection
To make a Bluetooth wireless connection:
1. From the stand-by display, press Menu » Settings »
Connectivity » Bluetooth.
2. To check which Bluetooth connection is currently active, scroll to
Active devices and then press Select.
3. To view a list of Bluetooth devices that are currently paired with your
Vertu phone, scroll to
Paired devicesand then press Select.
4. Select Options to access available options depending on the
status of the device and the Bluetooth connection.
Packet data
Your Vertu phone can use general packet radio service (GPRS) for
high-speed data connections. With GPRS, you can stay connected
to the mobile Internet and perform faster downloads without
completing a dial-up connection. GPRS connectivity can be used to
enhance MMS messaging, Web browsing sessions, e-mail, and PC
dial-up. GPRS is typically billed as an “always-on” function and you
are only charged for the data you transfer.
Enhanced GPRS (EGPRS), also known as EDGE (enhanced data
rates for GSM evolution) is similar to GPRS but the connection is
much faster. Contact your service provider for more information
about supported data connections and tariffs.
When you have selected GPRS as a data bearer, the phone
automatically uses EGPRS (EDGE) instead of GPRS if it is
available in the network.
Bluetooth driver compatibility information is available in the
Vertu PC Suite help.
Do not accept Bluetooth connectivity from sources you do
not trust. Alternatively, switch off the Bluetooth function.
This will not affect other functions of your Vertu phone.