User guide

Phone Settings 5-7
Chapter 5 - Configuration Via Web
Xcelerator IP User Guide March 2007
IP Phone Parameters
Volume Control
Handset Mic Set input level of handset microphone: 1-10. Default = 6
Handset Speaker Set output level of handset speaker: 1-10. Default = 6
Speaker Mic Set input level of hand-free microphone: 1-10. Default = 6
Speakerphone Set output level of hand-free speaker: 1-10. Default = 6
Headset Mic Set input level of headset microphone: 1-10. Default = 6
Headset Speaker Set output level of headset speaker: 1-10. Default = 6
Ring Tone Volume Set output level of ring tone: 1-10. Default = 6
Side Tone Set sound level between mouthpiece and earpiece: 1-10. Default = 5
Tones Used
Tone Type Select tone type for your country; Default = U.S.
Ring Type Select ring type for your country; Default = U.S.
DTMF Relay Select way to send DTMF through in-band or out band mechanism:
None | Tone (In-Band) | RFC2833 | SIP-INFO. Default = RFC2833
RFC2833 PayLoad SIP DTMF detection; Default = 101
RFC2833 DTMF Tone Duration Options: 560ms | 640ms | 800ms | 960ms | 1120ms | 1280ms;
Default = 800
Phone Parameters
Hold Remind Time Call on hold reminder tone (10-120 seconds, increments of 10 secs);
Default = 60
Enable Auto Answer Turn on auto answer function; Default = Disabled
Enable DND Turn on DND function; Default = Disabled
Enable Echo Canceller Remove echo to improve voice quality; Default = Enabled
Enable VAD+CNG Voice Activity Detection + Comfort Noise Generator; Default = Disabled
Enable Phone Lock Lock user’s phone; Default = Disabled
Prefix Entry Settings
Prefix Entry Type (0-9) Options: Disabled | Add | Replace; Default = Disabled
Prefix Entry Pattern (0-9) Digit to dial out
Prefix Entry Replace Replaces digit to dial out
Dial Plan Determines how to route calls