User guide

1-8 IP2007 Product Description
Chapter 1 - Introduction
Xcelerator IP User Guide March 2007
IP Phone In/Out Ports
No. Part Name Description of Function
1 Reset Button The Reset Button is for system engineering use (The
configuration will be reset to factory settings when
pressed).
2 Link/Activity LEDs The LEDs indicate the link status of the WAN and LAN ports.
3 WAN Port RJ-45 Jack 100/10Mbps Ethernet port for connecting to IP
network
4 LAN Port RJ-45 Jack 100/10Mbps Ethernet port for connecting to PC
or Notebook
5 Power Jack If a power source from adaptor is required, use the
standard power adaptor supplied in the package (12V/
1000mA).
6 Power Source There are two available sources for power: from Power
Adaptor or PoE (Power over Ethernet). The default is
Adaptor. Please set to the appropriate option before
installation. Default setting is Power Adaptor.
Only the Ethernet WAN port supports PoE.