Specifications

5-34 Voice Settings
Chapter 5 - Xcelerator IP Configuration
Xcelerator IP Administrator Manual March 2007
FXS Phone Number -- Defines the FXS phone number.
Operator speed-dial number -- When the "Operator" is called, the extension
identified in this field will be called. The operator extension length is restricted to a
single character.
Voice mail service number -- This field defines the extension number of the
Xcelerator IP internal voice mail system. When this extension is dialed, the user will
be directed to their voice mail box and will be able to access their voice mailbox.
Start PSTN Line number -- The Xcelerator IP is equipped to support up to three
analog PSTN lines. Each line has it's own direct access number which can be dialed to
access the trunk directly.
Start IP Trunk number -- The Xcelerator IP is equipped to support up to eight VoIP
(SIP) connections. Each line has it's own direct access number which can be dialed to
access the trunk directly.
Start Trunk Group number -- The Xcelerator IP is equipped to support up to four
trunk groups. When the trunk group number is dialed, the Xcelerator IP will seize the
first idle trunk in the group and automatically place the call.
All Paging number -- The Xcelerator IP is equipped to support internal paging (All
Calls Page). All internal IP2007 phones will be paged simultaneously if the All Page
number is dialed.
Start Hunt Group Number -- The Xcelerator IP is equipped to support up to 4 hunt
groups. You can enter up to 24 extension numbers in each hunt group and have each
Hunt Group rerouted to Voice Mail or the Auto Attendant. Make sure the phone
numbers you enter are the ones you configured in the Phone Extension page. Valid
entries are 10-120 seconds in 10-second increments.
Start Paging Group number -- The Xcelerator IP is equipped to support up to three
paging groups. When accessing a specific Page Group number, the internal IP2007
phones associated with that paging group will be paged simultaneously.
Pressing the "Configuration" box associated with in "Start Paging Group number", will
display the Paging Group Configuration screen as shown below: