Specifications

Voice Settings 5-31
Chapter 5 - Xcelerator IP Configuration
Xcelerator IP Administrator Manual March 2007
Call Restriction Table
The Call Restriction Table allows you to set the method for out-dialing from the IP2007.
- The value Y indicates that the caller must select a line key prior to dialing a
number.
- The value N indicates that the caller may place a call without selecting a line key.
- A value of YN indicates either operation is supported
From/To
The allowed intervals are made up of a From and To entry which establishes a
numeric range. For example, an entry of "From 1700", "To 1800" would include the
following range of numbers as the leading: 1700, 1701, 1702, …1799, 1800. Each
From/To entry can be from 1 to 13 digits long and may contain any digit 0-9, or X (X
representing any digit). The "From" entry must be less than or equal to the "To"
entry.
Trunk Access
Xcelerator IP checks the field only when a call matches the associated allowed
interval.
- If the field is set to "Y", the entry is valid when the trunk is accessed previously.
- If the field is set to "N", the trunk isn't accessed previously. The trunk will be
accessed through the Call Routing Table.
- If the option is set to "YN", the entry is valid no matter the trunk is accessed or
not previously.
COS
The Class of Service setting indicates the COS set under station programming. Any COS
with a value lower than the listed COS will be allowed. COS value 0 = Highest value, COS
value 7 = Lowest Value