Specifications

Voice Settings 5-27
Chapter 5 - Xcelerator IP Configuration
Xcelerator IP Administrator Manual March 2007
IP Trunk
The IP Trunk page allows you to configure the proxy and registration server of IP Trunk;
up to 8 lines of IP Trunk are supported.
Subscriber Information
- Trunk Number -- The assigned trunk number from Uplink Server.
- Register Expires -- how long the Xcelerator IP will send the REGISTER command
to an uplink registrar server. The values are set in seconds.
- Auth ID -- The Account ID of an uplink server used for Digest Authentication.
- Auth Password -- The Password to an uplink server used for Digest Authentication.
- SIP Proxy -- The address of an uplink registrar server (for Inbound Calls). Digital
IP address and domain name are all supported.
- SIP Proxy Port -- SIP signal port of an uplink registrar server.
- Outbound Proxy -- The address of an uplink outbound proxy server (for Outbound
Calls). All SIP request packets will be sent to this server which will determine their
next hops.
- Outbound Proxy Port -- SIP signal port of an uplink outbound proxy server.
Local Port
- Local SIP Port for IP Trunk -- SIP control signal packet Port of IP Trunk Client.
- Local RTP Port for IP Trunk -- Real-Time Protocol packet Port of IP Trunk Client.
This port is the Start RTP port address for these IP Trunks.