Specifications

4-10 Phone Book

Chapter 4 - Phone Features

Xcelerator IP Administrator Manual March 2007

Phone Book

The Xcelerator IP provides users with a Phone Book, with each entry containing a user

programmed Phone Number and User Name. The phone number can be an extension

number, phone number, or IP address. Up to 400 entries per station user is supported.

Phone & Web Access

» Phone Menu = Left soft key to CONFIG >  key >  arrow to 12. Phone Book

» Web Menu = Login > Phone Book tab > enter a party’s name and number in order for

Caller ID to display on incoming calls

Place a Call

There are various ways to place a call:

 Lift the handset and dial the number pad as a regular phone.

 Press the SPEAKER button to perform handsfree dialing.

 Press the HEADSET button to perform headset dialing.

 Press a LINE button to pickup a specific line.

 Dial directly, the phone will automatically pickup in handsfree mode and perform

handsfree dialing.

The phone should be configured before it can perform some basic functions. Although the

phone can make a peer to peer VOIP call (the user must remember the IP address of the

called party), it is desirable to have a centralized server to provide the directory service.

This server can be a soft-switch, an IP-PBX, or a simple proxy.

The server has two basic functions:

1) The first is to track active phones and their IP address.

2) The second is passing signaling messages between communication parties.

To make your phone reachable in this VOIP network, your phone has to register to the

server so that when someone dials your phone number the server knows where you are

and informs your IP phone that someone is calling.

Phone & Web Access

» Phone Menu = Left soft key to CONFIG >  key >  arrow to 16. Admin > SIP

» Web Menu = Login + SIP tab (refer to “SIP Page” on page 5-10)

To speed up the calling process … you can press the pound [#] key or the [OK] key after dialing

the phone number.