Specifications

Using the Wizard Program 2-11
Chapter 2 - Installation
Xcelerator IP Administrator Manual March 2007
Wireless Basic
The Wireless Basic program allows you to configure basic features of the wireless LAN
interface. You can perform the following types of functions:
 Enable or disable the wireless LAN interface.
 Hide the network from active scans.
 Set the wireless network name (also known as SSID).
 Restrict the channel set based on country requirements.
GUIDELINES
The operating distance or range of your wireless connection can vary significantly based
on the physical placement of the wireless firewall. The latency, data throughput
performance, and notebook power consumption also vary depending on your
configuration choices.
For best results, place your Xcelerator IP unit:
 Near the center of the area in which your PCs will operate.
 In an elevated location such as on a high shelf where the wireless connected PCs
have line-of-sight access (even if through walls).
 Away from sources of interference, such as PCs, microwaves, and 2.4 GHz
cordless phones.
 Away from large metal surfaces.
The time it takes to establish a wireless connection can vary depending on both your
security settings and placement. WEP connections can take slightly longer to establish.
Also, WEP encryption can consume more battery power on a notebook PC.