Specifications

Management Settings 5-49
Chapter 5 - Xcelerator IP Configuration
Xcelerator IP Administrator Manual March 2007
Access Control Menu
The Access Control settings allow the System Administrator to configure the Web Port,
Service Control List, IP Address Access Control mode and password for user 'admin'.
Web Port
This page allows you to change the number of the Xcelerator IP web port. A change
will take effect after a system reboot. The default for the Web Port is 80.
Services
Clicking on the Enable box for any of the services listed will activate that service.
HTTP, ICMP, Telnet, and TFTP are supported on the Xcelerator IP.