Specifications

5-48 Management Settings
Chapter 5 - Xcelerator IP Configuration
Xcelerator IP Administrator Manual March 2007
Day Light Savings Time
The Daylight Savings Time page allows you to configure the Daylight Saving Time
(DST) which includes support for auto adjustment of daylight saving time. By clicking
on the "Save Settings" button, the DST configuration will be saved to the Xcelerator
IP. Clicking the "Cancel Changes" button cancels any changes.
 Default International DST Rule obeys the international standard rule.
 Manual DST Rule allows you to define your own Daylight Savings Time Rule.
Start Time of DST -- Daylight Savings Time start date and time.
If "Weekday" is set to "0", the date to start Daylight Savings is the date given in the
'Month" and "Day" setting. If "Weekday" is set to other than "0", Daylight Savings
Time will start on the "Weekday" after the given date.
End Time of DST -- Daylight Savings Time start date and time.
If "Weekday" is set to "0", the date to end Daylight Savings is the date given in the
'Month" and "Day" setting. If "Weekday" is set to other than "0", Daylight Savings
Time will end on the "Weekday" after the given date.
Save Time during DST Period -- The time (in hours, minutes, and seconds) to add
to the current time during daylight saving period.