Owner`s manual

Vertical Xcelerator IP

Xcelerator Owners Manual AccessLine 05-01-09

4. Use the DOWN arrow of the navigation pad to scroll

to “No Answer Forward"

5. Press the

Key

6. Use the DOWN arrow

of the navigation pad to scroll

to “No Answer Time"

7. Press the

Key

8. Use the BACKSP softkey to remove the number of

seconds displayed then, enter the number of seconds your

phone should ring before the voicemail answers (one ring is

approximately 4 seconds)

9. Press the

Key.

Using a Fax Machine

To send and receive faxes, plug the phone cord from your fax

machine into the yellow port marked “Fax” on the back of the

Vertical Xcelerator IP. The fax machine must be plugged directly

into the back of the base unit, and cannot be connected to your

router or LAN.

If you are having problems with faxing, you may need to refer to

your fax machine owner’s manual and adjust the configuration on

your fax machine. For best performance with Digital Phone

Service:

• If your fax machine has an “ECM” (“Error Correction Mode)

feature, please disable this function,

• Check your fax machine’s speed (sometimes called “Baud

Rate”), and set it to 9600 or lowest possible speed.