Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
84
caller’s name and number is stored in the Contacts List, the caller’s
name displays. A number or name is only listed once, but all
missed calls are counted so you can see how many times the same
caller has tried to reach you.
Viewing Entries in the Call Log
To view entries in the Call Log:
1. In Idle mode, press OK
to display the Main Menu.
2. Select Call Log
and press OK (or in Idle mode,
press the Call log
softkey).
3. Use the up and down navigation keys to scroll through the
names and numbers on each page.
4. Use the right and left navigation keys to scroll through each
page (All calls, Missed calls, Incoming calls, Outgoing
calls).
5. Use the Options
softkey on each page to perform
additional tasks on your Call Log entries, including:
o Add as contact
o Append to contact
o Call on VoIP
o Edit for call
o Delete
o Delete list
Resetting the Cordless Transmitter
In order for your Cordless Phones to register with the Cordless
Transmitter, when you first install a new Cordless Phone you must
press the RESET button on the rear of the Cordless Transmitter.
Once your phone is registered you should not need to repeat this
procedure.
Each time you reset the Cordless Transmitter, the Cordless Phones
will re-register. Make sure Cordless Phones are within range of the
Cordless Transmitter to register properly.
To reset the CORDLESS TRANSMITTER:
• Momentarily press and release the RESET button on the
rear of the CORDLESS TRANSMITTER (do not hold it
down).
• On the front of the CORDLESS TRANSMITTER, the
POWER light will remain on steadily during a reset and the
I-NET light will flash and the VoIP light will go out.
• After a few minutes when the reset is complete the I-NET
light will remain on steadily, and the VoIP light will come
back on, indicating the CORDLESS TRANSMITTER is
ready to use.