Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
82
3. Select the contact for which you want to change the default
number.
4. Press the Options
softkey.
5. Select Edit contact, and press OK
6. Select the number you want to use as the default number
for this contact, and press the Edit softkey.
7. Press the Options
softkey.
8. Select Default from the list of options, and press OK
and press the Yes
softkey at the prompt to confirm
...The number is now set as the default for this contact.
9. Press the Red
key to return to the contact. The new
default number will be displayed in bold.
10. Press the Save
softkey to save the setting, and press
the Yes softkey at the save prompt.
Creating a Speed dial for a Contact
You can create a speed dial to use for a specific contact in your
Contacts List allowing you to call the number quickly.
To create a speed dial for a contact:
1. In Idle mode, press OK
to display the Main Menu.
2. Select Contacts
and press OK
3. Select the contact for which you want to create a speed
dial, and press the Options
softkey.
4. Select Speed dial, and press OK
5. Select a speed dial key (from 1 through 9) to assign to the
contact.
6. Press the Add
softkey to add the contact to that speed
dial key.
7. The speed dial is immediately applied.
8. Press the Red
key to exit.
Note
Note: To call a speed dial entry press the speed dial number
and then press OK ...
Note: In the speed dial screen, to replace an existing entry
select the speed dial entry you want to replace, and press the
Replace softkey. To delete a speed dial key, scroll to the speed
dial you want to delete and press the Delete softkey.
Groups of Contacts
Adding contacts to groups allows you to view pages of entries by
group, simplifying looking people up in a large Contacts List. You
can also assign ring tones to groups of contacts, helping you
identify incoming calls.
Creating a Contact Group
Before you can add a contact to a group, you must create the empty
group. Each group has its own page in the Contacts List accessed
using the right and left navigation keys.