Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
77
Call waiting can be turned off if you do not want to be interrupted by
other calls while you are in the middle of a call. If cal waiting is
turned off, then other new incoming calls will route to your voicemail.
To enable or disable call waiting do the following.
1. From the idle screen, press the Options
softkey.
2. Select Call Waiting and press OK
3. Select Enabled or Disabled and press OK
4. Press the red
key to exit.
Setting Audio
The Cordless Phone has a variety of audible indicators, ranging
from incoming call rings to keypad button sounds. All sounds can be
turned off or customized through the Cordless Phone menu.
Changing the Ringer Melody
You can specify a ringer melody for each type of call that you
receive.
To change the ringer melody, do the following.
1. In Idle mode, press OK
to display the Main Menu.
2. Select Settings
and press OK
3. Select Audio settings, and press OK
4. Select Ringer Melody, and press OK
5. Select the type of call for which you want to specify a ringer
melody, and press OK
6. Select a ringer melody from the list to assign to the selected
type of call. You can scroll through the list of melodies
using the navigation keys and can hear a sample of the
assigned melody by pressing the Play softkey.
7. Press OK
Changing the Ringer Volume
You can increase or decrease the ringer volume on a Cordless
Phone.
To change the ringer volume, do the following:
1. In Idle mode, press OK
to display the Main Menu.
2. Select Settings
and press OK
3. Select Audio settings, and press OK
4. Select Ringer volume, and press OK
5. Use the navigation keys to adjust the volume, and press
OK