Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
74
2. Select Settings and press OK
3. Select Telephony settings, and press OK
4. Select Call Forwarding and press OK
5. Select On No Answer, and press OK
6. Select “Enabled”, and press OK
(or select “Disabled” if
you want to disable unconditional call forwarding)
7. Enter the desired forwarding phone number, and press OK
8. Enter the Timeout (number of seconds the phone should
ring before forwarding) and press OK
9. Press the Yes softkey if prompted to Save
10. Press the Red
key to go back to the idle menu
Note
By default the On No Answer Forwarding is set to forward to 200.
200 is the extension of the voicemail box. If you remove No
Answer Forwarding to 200, you must remember reestablish the
forwarding to 200 in order for your calls to go to voicemail if your
phone is not answered.
Customizing Your Cordless Phone
Entering Text, Numbers, and Symbols
The Cordless Phone interface allows you to perform several options
to customize your phone, some of which require you to enter text
and numbers on the Cordless Phone screen. This section describes
how to enter text and numbers on your phone.
When in an option requiring you to enter or edit text or numbers (for
example when adding contacts to the Contacts List), the following
softkeys display for your use:
The Erase
softkey enables you to backspace and erase
character that was just entered.
The Options
softkey provides you with the following two options:
• Input mode
• Insert symbol
Text Input Modes
When you reach a screen requiring text or numerical input, the
Options softkey on the right allows you to switch between different
types of input. Pressing the Options softkey you can choose
between Input mode (for characters) and Insert symbol.