Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
72
8. Select Transfer and press OK
9. You phone will disconnect.
Call Park and Call Pickup
Parking a Call
The Vertical Xcelerator supports 4 “Call Park” positions. To park an
active call on your cordless phone:
1. During an active call, press the Options
softkey.
2. Scroll down to one of the free Call Parked positions (a free
position is in red).
3. Press OK
. The call will be parked.
Pickup a Parked Call
To pick up a call that has been parked on another phone:
1. From the Idle screen, press the Options
softkey.
2. Scroll down to desired in use Call Parked positions (the in
use positions are in black)
3. Press OK
(the call will be released from Park on the
other phone, and you will be connected to the call on the
new phone)
Muting/Unmuting a Call
You can mute/unmute active calls if required. When a call is muted
the bottom left softkey label reads Mute off, and although you can
still hear the call, no one else connected to the call can hear you.
To mute or unmute a call, do the following:
1. During an active call, press the Mute
softkey.
2. Press the Mute off softkey to unmute the call.
Ending Calls
Press the Red
key. The Cordless Phone displays the call
terminated icon and then returns to the idle state screen.
Unconditional Call Forwarding
You can set your Cordless Phone to forward all calls to another
phone number by using the Call Forwarding Unconditionally feature.
Configuring Unconditional Call Forwarding
To forward all calls to another phone number:
1. In Idle mode, press OK
to display the Main Menu.
2. Select Settings
and press OK
3. Select Telephony settings, and press OK