Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
70
To make the call on hold active and leave the active call on hold do
the following.
1. Press the Options
softkey.
2. Select Swap calls and press OK
Conferencing Calls
While on an active call with a second call on hold, you can connect
to both calls at once.
To connect to both calls do the following.
1. Press the Options
softkey.
2. Select Conference and press OK
Calling with a Call on Hold
You can make a second call while one call is on hold. The caller on
hold hears music playing until reconnected as an active call.
To make a call while leaving a call on hold, do the following.
1. Place the active call on hold if you haven’t already done so,
(press the Options
softkey and select Hold call).
2. Enter a number or use the Options
softkey to find an
Intercom, Contact, or Call Log number.
3. Press the Green
key to complete the call.
4. When the active call has disconnected or you have ended
the call pressing the Red
key and you will return to the
call on hold.
Transferring Calls
The Cordless Phone allows you to do both, attended (warm) and
blind Call Transfer. You can transfer calls from your Cordless Phone
to other Cordless Phones, Desk Phones or any other phone
number.
Blind Call Transfer
Blind Transferring to another Cordless Phone or Desk Phone
You may transfer an active call to another Cordless Phone or Desk
Phone.
To transfer a call to another Cordless Phone or Desk Phone do the
following.
1. During an active call, press the Options
softkey
2. Select “Hold call” and press OK
.
3. Press the Options
softkey.
4. Select Transfer, and press OK
5. Dial the three digit extension number of the Cordless
Phone or Desk phone that you want to transfer to.