Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
67
2. Select Call Log and press OK (or In Idle mode,
press the Call log softkey).
3. Select the number you want to call, and then press the
Green key
.
Calling Using Redial
To call using redial do the following.
1. In Idle mode, press the Options
softkey.
2. Select Redial, and then press OK
3. The most recently dialed number displays.
4. Press the Green key
to call the number.
Calling Using Speed dial
To call using a speed dial key, do the following.
Note: You must pre configure the speed dial keys before using
these procedures. To configure a speed dial on the phone, see
Creating a Speed dial for a Contact on page 80.
1. In Idle mode, press the speed dial key assigned to the
contact you want to call.
2. Press the Green key
.
Answering Calls
Your Cordless Phone allows you to turn on and off auto answer
features, such as answering a call when removed the Cordless
Phone form the charging cradle, or connecting to incoming calls
when any key is pressed.
Answering a Call
To answer a call from the Cordless Phone do the following.
1. Pick up the Cordless Phone
2. Press the Green key
.
Note: If the Cordless Phone has auto answer enabled and is in the
Cordless Phone cradle, simply picking up the phone will answer the
call.
Answering a Call on the Speaker Phone
To answer a call on Speaker Phone, do the following:
1. When the phone rings, press the Speaker Phone
button
on the left side of the phone
2. Begin speaking
Auto Answer Mode
In auto answer mode your Cordless Phone can answer a call
automatically when you pick it up from the charging cradle. If the