Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
29
Connect one end of the black Ethernet cable to the WAN
connector on the rear of the Cordless Transmitter.
2. Connect the other end of the black Ethernet cable to any one of
the green “Phone 1”, “Phone 2”, “Phone 3”, or “Phone 4”
connectors at the rear of the Vertical Xcelerator Base Unit.
3. Connect the Cordless Transmitter power adaptor to the “DC 9-
20V” connector at the rear of the Cordless Transmitter, and then
plug the power adaptor into a 120 VAC power outlet.
Note
The connector labelled “LINE” at the rear of the Cordless
Transmitter is not used. Do not connect anything to this
connector.
Setting up the Cordless Phones
4. Open each Cordless Phone box and remove the Cordless
Phone, Power Adapter, Battery, and Handset Cradle.
5. Connect the Cordless Phone Cradle power adaptor to the
power connector on the rear of the phone cradle, and then plug
the power adaptor into a 120 VAC power outlet.