Owner`s manual

AccessLine Communications

Owners Manual AccessLine 5-4-10

Note

Adapter away from the phone as shown.

3. Connect Power to the Desk Phone

Use the included power cord and plug one end into the back of the

phone and the other end into the wall outlet. The phone will indicate

that it is configuring itself. Once the phone has finished its

configuration, it is ready to make and receive phone calls.

Note

To the right of the power plug is a switch marked Power Source.

The switch position must be set to Adapter. POE is not

supported.

Connecting a Fax Machine

The Xcelerator phone system allows you to plug in your fax

machine and receive and send faxes without having a separate fax

line. Plug the existing phone cord from your fax machine into the

yellow port on the back of the base unit marked “Fax”.

NOTE- If you are having trouble sending or receiving faxes,

please refer to “Using A Fax Machine” on page 40