Owner`s manual

AccessLine Communications
Owners Manual AccessLine 5-4-10
20
2. Connect the Base Unit to your Existing router
Use the Blue WAN Cable and connect one end to the To Router
port (located at the top of the base unit). Connect the other end of
the blue WAN cable to an unused LAN port on the back of your
existing router or modem/router.
3. Connect power to the Base Unit
Use the included power cord and plug one end into the Power In
port on the back of the Base Unit and the other end into the wall
outlet. Turn the Base Unit on by using the power switch located at
the bottom. Move the switch in the direction of the SW.
IMPORTANT: Please wait 5 minutes after powering on the Base
Unit before proceeding to install the Desk Phones.