User guide

3-54 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 3 - Using Wave Phone Features Visual Voice Mail
Using the Query Feature
A query of a feature key will display what feature has been programmed onto
the key.
To display feature information:
1. From an idle phone, press MENU softkey on the display.
2. Press a feature key.
The feature key information is shown on the display including the feature
name, key number, and extension number, target number, or
programmed number if applicable.
3. Press SPEAKER to clear the display.
VISUAL VOICE MAIL
The Visual Voice Mail feature allows the phone to display applicable prompts
and soft key options while the phone is connected to voice mail.
Example: : When listening to a new voice mail message, the display will offer
the choices “Replay Save Del” (replay the message, save the
message, delete the message), so that the user can select one of
these options without having to wait to hear the prompt.
Using Visual Mail [D]
For DIGITAL Phones
To use Visual Voice Mail:
1. While the phone is connected to voice mail, read the prompts on the
display.
2. Press the corresponding soft key of the feature you want to access.
To increase the number of visual options offered:
When using Visual Voice Mail, there are basic options you have available
(Replay and Save). However, you can increase these options by enabling
the Verbose Prompt Mode. Once this feature has been enabled, you can
press the More softkey to view additional options for listening to
voicemail.
Example: : In addition to the typical options of
Replay, Save, More, once you
enable this option, you can press
More to see additional options
such as
Delete and Skip. If you press More again, you’ll see Rew
and
FFwd. Press More a third time and you will be returned to the
original options of
Replay, Save, More.
1. From an idle phone, press
MENU softkey on the display.
2. Press
NEXT until VPRMT appears, then press the corresponding key.
3. Press On to select the Verbose Prompt mode.