User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-53
Chapter 3 - Using Wave Phone Features User Programmable Keys
USER PROGRAMMABLE KEYS
The following features are user programmable (keys): Autodial, Call Return,
Camp-On, Do Not Disturb, DSS/BLF, Extension Pickup, Group Pickup,
System Speed, Unassigned, User Forward, and Voicecall. In addition to
choosing which feature is associated with an assigned key, the user can also
specify select values for the keys.
Note: Some phones may have a programmed key (usually named
“Program”) available for performing these programming tasks. Contact your
Wave system administrator for more information about whether or not a
“Program” key exists on your phone.
Using Programmable Keys [D]
For DIGITAL Phones
Programming a Feature Key
Note:
Not all feature keys are user programmable, thus you cannot edit a key
that is not in the above list. Display the feature information as described above
to determine which keys are available for programming.
1. From an idle phone, decide which key you want to program.
2. Press
MENU softkey on the display.
3. Press NEXT until PROG appears, then press the corresponding key.
4. Press NEXT until the desired feature is displayed, then press the
corresponding key.
5. Press the key you wish to program.
If additional options are available (such as an extension for User Forward
or Blind Transfer for DSS/BLF) you will be prompted at this point to enter
the information.
6. Press SPEAKER to clear the display.
To clear a feature key:
Follow the above steps, and program the key as “Unassigned”.