User guide

3-50 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 3 - Using Wave Phone Features Transfer
TRANSFER
Transfer places a call on hold while you dial the destination extension number.
Your system administrator configures the Transfer keys as blind or supervised
transfer keys.
Making a Blind Transfer [ALL]
A blind transfer allows you complete a transfer without announcing the party
to the destination extension.
For SIP Phones
To make a blind transfer:
1. While on a call, press Transfer ( ) to place the active call on hold.
2. Listen for dial tone, then enter the destination extension number.
3. Press Transfer ( ) again or hang up.
The party is transferred to the destination extension.
Hint: For models 480i/480CT and 9133i, you can also use the L2 button
to make this transfer. See the Hint under Supervised Transfer for details.
For DIGITAL Phones
To make a blind transfer:
1. While on a call, press TRNS/CONF to place the caller on hold.
2. Listen for dial tone, then enter the destination extension number.
3. Hang up to complete the transfer.
The party is transferred to the destination extension.
For ANALOG Phones
To make a blind transfer:
1. While on a call, press FLASH.
Note: You can also use this alternate step: While on a call, press FLASH
then 1, then listen for the prompt to assist you with making the transfer.
2. Dial the destination extension.
Hang up to complete the transfer.